Testing Equipment

Product Details:

Marshal Stability Testing Machine

Conforming to specification as laid down in accordance to ASTM D-1559 consists of followings:

LOADING FRAME; Capacity 50 KN (5000 kgf.) electrically operated having constant rate of strain 50.8mm/minute suitable for operation on 220/230 Volts, single phase A.C. Supply.

COMPACTION MOULD: complete with interchangeable collar and base plate duly chromium plated as per latest code.

SAMPLE EXTRACTOR; Used to extract sample from mould consists of a thrust plate and loading bar.

COMPACTION PEDSTEL& RAMMER: consists of compaction rammer having 4.5 kgs mass with a free fall of 457mm used with compaction pedestal comprises a wooden block capped with a steel plate and mould assembly

BREAKING HEAD. Consists of upper and lower cylindrical segment of test head having inside radius of curvature 5cm.

PROVING RING; Stress measuring proving ring capacity 30kn  made out of special alloy steel to gives maximum repeatability as per I.S. 4169 fitted with dial gauge least count 0.002mm  with factory calibration certificate in polished wooden box.

FLOW MEASUREMENT DIAL GAUGE. Least count 0.01mm x 25mm travel

Complete outfit as above         Rs. 39000/-

Water bath for above, double walled inside made of stainless steel, outer of thick mild steel stove enameled paint thermostatically controlled from room temperature to 100 degree C suitable to accommodate 4 stability mould.  Rs.10500/-

Product Details:

Compression Testing Machine Electrically Operated with Digital Display  with RS232 Computer attachable

1000 KN 4 pillar/channel type    Rs. 85000/-

2000 KN 4 Pillar/channel type    Rs. 109000/-

3000 KN 4 pillar/channel type    Rs. 210000/-

Additional Information:

• Production Capacity: Depends on order
• Delivery Time: 5-7 days
• Packaging Details: Wooden case-packing

Product Details:

Additional Information:

• Production Capacity: Depends on order
• Delivery Time: 1 week
• Packaging Details: Corrugated Box or wooden box

Product Details:

Machine is used to test the fatigue strength of materials  and to draw S-N diagram ideal equipment for Technical Institutions, Research Institutes, and Laboratories etc. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 RPM by a motor. A complete cycle of reversed stresses in all fibers of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure. Machine meets requirements of International / Indian Standards

Features :

Light weight, compact size, simple design Table model, no need of  foundation
Simple lever system for changing load
Accurately calibrated as per IS 5075 Calibration in Nm available on request.

10kg   Rs.83500/-

20kg   Rs.88550/-

Additional Information:

• Delivery Time: 7-10 days
• Packaging Details: Wooden

Product Details:

Product Details:

Additional Information:

• Item Code: na
• Production Capacity: unlimited
• Delivery Time: as per location
• Packaging Details: The standard penetrometer is ruggedly constructed, with an aluminium base table with levelling screws, plated. vertical rod, "micrometric vertical adjustment device". The slider is brass made with free fall.