Lateral Pressure Assembly with foot pump 150 PSI small size Rs. 6500/-
Lateral Pressure Assembly 10kg/cm2 - It is designed for application of cell pressure upto 10kg/cm on a triaxial specimen in the triaxial cell. The unit is mostly used in routine tests which last for about 10 to 15 minutes wherein the variations of cell pressure can be tolerated.
Sieve Shaker Motorized
Suitable to carry 7 sieves of 20cm diam. The shaker is driven by a 0.25 H.P. electric motor through a reduction gear. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. By removal of a stop pin fixed below the table, the shaker can have a rotary motion. In addition to the gyratory motion there is an upward and downward movement ensures that each square cm of sieve is utilized. The whole gear assembly runs in an oil bath, , but without oil Rs.13500/- each
As above but for 30 cms diam Sieves Rs. 16500 each
As above but for 45 cms diam Sieves Rs. 24000/- each
Sieve Shaker Motorized Gyratory
.As above but with closed body and electronic digital timer 0-99 minuts
Carries up to 7 sieves of 150mm or 200mm diameter. The shaker is driven by a ¼ H.P. Motor through a reduction gear immersed in oil. The sieve table does not rotate but is inclined from the vertical axis and the direction on inclination charges progressively in clockwise direction. If the stop pin below the table is removed, the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder is supplied. The holder can be fixed on the top of the upper most sieve, and thus the sieve set in firmly held. Suitable for operation form 230 V, 50 Hz Single Phase A.C. Supply.
for 20 cms diam Sieves Rs. 15000/- each
for 30 cms diam Sieves Rs. 18000/- eachfor 45 cms diam Sieves Rs. 29000/- each
Le-chatlier Mould it includes a small split cylinder forming a mould of 30mm internal dia and which is 30 mm high. Two parallel indicating arms with pointed ends are fixed on either side of the fixed cylinder. The mould is offered with two glass plates and lead weights. Moreover, a set of six moulds is supplied in the cardboard box. Our product is fabricated in compliance with IS: 5514 standard and can be delivered on time.Set of 6 Moulds in a card Board box. 1200/-