New Items

Product Details:

Dutch type, Bucket type, Post Hole type , Screw type. Euro type. Every one one meter long with handle
Size 35mm  1300
Size 50mm  1500
Size 60mm  1800
Size 75mm  2100
Size 100mm 2800
Size 150mm 4200
Extension Rod 1 meter long   1200

Additional Information:

• Production Capacity: Depends on order
• Packaging Details: Gunny Packing

Product Details:

Rupson  Groove Cutting Machine:- Prime Mover: With Electric Motor, 2800 RPM Blade Diameter 14” to 16” Blade Thickness 3/4/5/mm Cutting speed 25 mph Cutting depth as per blade dia. with Water Tank Wheels – Rubber coated – 2nos. Weight-140 Kg Appx

With  5 HP Crompton Motor                      Rs. 40000/-

With  10 HP Crompton Motor                    Rs. 54000/-

With Honda GX 200 Petrol Engine 5 HP     Rs. 49500/-

With Grieves Diesel Engine 5 HP               Rs. 61000/-

With Grieves Diesel Engine 9 HP               Rs. 86000/-

With VST Shakti Engine 13 HP (Can take cut up to 12”)  Rs. 155000/-

Product Details:

 

Additional Information:

• Production Capacity: Depends on size
• Delivery Time: 10-15 days
• Packaging Details: Wooden

Product Details:

For Glycerol :Temp. range Ambient 50*C to 180*C    Rs. 20000/-

Additional Information:

• Production Capacity: Depends on order
• Delivery Time: 1 week
• Packaging Details: Corrugated Box or wooden box

Product Details:

With VST Shakti Engine 13 HP  Cut up 12"  Rs. 150000/-

Additional Information:

• Production Capacity: Max Cut 12" more against order
• Delivery Time: 8-10days
• Packaging Details: wooden

Product Details:

   300mm   Rs.5500/-

Additional Information:

• Packaging Details: Card Board/Wooden

Product Details:

Additional Information:

• Production Capacity: Depends on order
• Delivery Time: 10-15 days
• Packaging Details: Wooden packing

Product Details:

Core Drill Bit – Diamond for taking out cores from soil, rock , concrete or any mineral ores etc
Outer Diameter 
30mm        Rs.1200/-
38mm        Rs. 1600/-
2"               Rs. 2200/-
3"               Rs. 3300/-
90mm        Rs. 4000/-
4"               Rs. 4300/-
114mm      Rs. 5300/-
6"              Rs. 7500/-
8"              Rs. 8800/-
10"            Rs. 10000/-

Additional Information:

• Production Capacity: Depends on order
• Delivery Time: 2-3 days
• Packaging Details: Corrugated Box

Product Details:

Designer  Rs. 600/-

Additional Information:

• Production Capacity: Depends on order
• Delivery Time: 1 week
• Packaging Details: Carton

Product Details:

Diameter  8   mm Rs. 280/- each

Diameter 12  mm  Rs. 656 each

Diameter 15  mm  Rs. 1087/- each 

Diameter 19  mm  Rs. 2110/- each

Diameter 25  mm  Rs. 3965/- each 

Diameter  1”    Rs. 4050/- each

Diameter ¾"    Rs, 1933/- each

Diameter   ½”  Rs. 695/- each 

Diameter   ¼”   Rs. 204/- each 

Diameter   5/16”  Rs. 254/- each

Diameter   9/16”     Rs. 985/- each

Additional Information:

• Delivery Time: 8-10 days
• Packaging Details: Depends on quantity

Product Details:

Cronosonic is an instrument for ultrasonic pulse velocity through transparency which can be used to investigate poles, truss, diaphragms, laboratory samples and many other structures made of concrete or stone. It performs measurements with direct, indirect and semi direct method. Measurements can be transferred to a PC through USB connection.

Number of channels: 2 TX/RX

Internal storage : 50 measures

Operating temperature: -20 / +80 °C

Power supply: L220 x H225 x P250 mm

Ports: mini-USB charge / data download

Display : 3" visualization 

Frequency: frequency of resonance 52 kHz

Reference legislation: ASTM C597 – 09 Standard Test Method for Pulse Velocity Through Concrete
Make: MAE, ITALY

Additional Information:

• Delivery Time: 3-4 days

Product Details:

Additional Information:

• Packaging Details: Card Board/Wooden

Product Details:

   _{Size/Shape F    Rs, 150/-}

Additional Information:

• Production Capacity: Depends on order
• Delivery Time: 1-2 days
• Packaging Details: Card Board Box Packing

Product Details:

Machine is used to test the fatigue strength of materials  and to draw S-N diagram ideal equipment for Technical Institutions, Research Institutes, and Laboratories etc. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 RPM by a motor. A complete cycle of reversed stresses in all fibers of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure. Machine meets requirements of International / Indian Standards

Features :

Light weight, compact size, simple design Table model, no need of  foundation
Simple lever system for changing load
Accurately calibrated as per IS 5075 Calibration in Nm available on request.

10kg   Rs.83500/-

20kg   Rs.88550/-

30kg      Rs. 101200/-

Additional Information:

• Delivery Time: 7-10 days
• Packaging Details: Wooden

Product Details:

Sand Content Kit One of the primary functions of a drilling fluid is to carry drilled solids from the well bore. These solids are a contaminant, and if left in the system, can lead to numerous problems. The offsite sand content kit determines the volume percent of sand-sized particles in the drilling fluid. The definition of sand-sized particles is, as any material larger than 74 μm (200-mesh) in size. The test can be performed on low solids fluids as well as on weighted fluids. The kit consists of a glass tube graduated to read percent (%) by volume, a funnel, and a 200-mesh sieve contained in a cylindrical shaped holder. Consists of sand content kit, complete, with sieve, funnel, graduated tube, wash bottle & carrying case

Additional Information:

• Production Capacity: Depends on order
• Delivery Time: 1-2 days
• Packaging Details: corrugated Box

Product Details:

Heavy Duty Vacuum Bottle This autoclavable bottle, made of polypropylene, has thick walls, is rugged can be used for repeated applications of vacuum.

Product Details:

Complete measurement in 2 seconds
Non contact prevent cross infection
safe fast and accurate temperature measurement

The sensor displays the measured value in terms of an NDVI reading on its LCD display screen.  NDVI readings can range from 0.00 to 0.99; the higher the reading, the healthier the plant.

Additional Information:

• Minimum Order Quantity: 1 Piece
• Production Capacity: Depends on order
• Delivery Time: 1-2 Weeks
• Packaging Details: Carton

Product Details:

Applications:

·         Measures leaf chlorophyll, an important indicator of plant health.

·         This performs quick measurements

·         Non-destructive measurement of plant chlorophyll

·         Enables quick, easy measurement of the chlorophyll content of plant leaves without damaging the leaf

·         Quick, easy measurement of chlorophyll levels in plant leaves without damaging the leaf.

·         Measurements are taken by just closing the measuring head on the leaf.

·         Since the leaf is not cut off or damaged in any other way, the same leaf can be measured as the plant grows

·         Trend graph display. Up to 30 measurements can be stored in memory and displayed on a trend graph so that changes in measurements over time can be seen and abnormal values can be noticed at a glance

·         Water-resistant.

·         This is water-resistant (IPX-4) so it can be used outdoors even in the rain

·         It is not miscible, and should not be washed with water

·         Compact and lightweight for portability.

·         This is small enough to fit in a pocket and weighs only 200 g, so it can be taken anywhere

·         Low power consumption.

·         It uses LED light sources, resulting in extremely low power consumption, with approximately 20,000 measurements from one set of fresh alkaline-manganese batteries

·         Monitoring of growth and health of plants

Additional Information:

• Production Capacity: Depends on order
• Delivery Time: 1-2 Weeks
• Packaging Details: Carton